7
2.3
Security Features
The MR55-HW features multiple options for physically securing the access point after installation:
1.
Security screw
–
The accessory kit includes screws that can be used to secure the
access point to the mount plate. Engaging the security screw prevents accidental
dislodging and theft.
2.
Kensington lock
–
The access point contains a hard point that allows it to be secured to
any nearby permanent structure using a standard Kensington lock.
2.4
Ethernet Ports
The MR55-HW features an Ethernet RJ45 port that accepts 802.3at power (labeled
“PoE”).
This port
should be used for uplink to your WAN connection.
2.5
Power Source Options
The MR55-HW access point can be powered using either the Meraki AC Adapter or 802.3at PoE
Injector (both sold separately) or a third-party 802.3at PoE switch.
2.6
Factory Reset Button
If the button is pressed and held for at least five seconds and then released, the MR55-HW will
reboot and be restored to its original factory settings by deleting all configuration information stored on
the unit.