manualshive.com logo in svg

Cisco ME 2400, System Message Manual, Page: 98 / 106

Share
Download
Cisco ME 2400 System Message Manual Download Page 98

 

2-86

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2      Messages and Recovery Procedures

TCAMMGR Messages

Error Message   

TCAMMGR-3-INDEX_ERROR: cam value/mask index [dec] is invalid. 

Explanation   

This message means that the CAM index used by the caller is not valid. [dec] is the 

index value.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

Error Message   

TCAMMGR-3-MOVE_ERROR: cam entry move from index [int] to index [int] 

failed. 

Explanation   

This message means that moving a CAM entry from one index to another failed. [int] is 

the index value.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

Error Message   

TCAMMGR-3-REGION_ERROR: cam region [dec] is invalid. 

Explanation   

This message means that the CAM region is not valid. [dec] is the region.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

Error Message   

TCAMMGR-3-REGMASK_ERROR: invalid cam region [dec] mask [dec] pair. 

Explanation   

This message means that a caller attempted to install an entry with an invalid mask for 

the region. Only a predetermined set of masks is allowed in a region. The first [dec] is the region, 
and the second [dec] is the mask.

Recommended Action   

Copy the message exactly as it appears on the console or in the system log. 

Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information. For more information about these online tools and about contacting Cisco, see the 

“Error 

Message Traceback Reports” section on page 1-3

.

Summary of Contents for ME 2400











































































































Reviews:

No comments