manualshive.com logo in svg

Cisco ME 2400, System Message Manual, Page: 86 / 106

Share
Download
Cisco ME 2400 System Message Manual Download Page 86

 

2-74

Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide

OL-9641-04

Chapter 2      Messages and Recovery Procedures

SPANTREE_FAST Messages

Error Message   

SPANTREE-7-PORTDEL_SUCCESS: [chars] deleted from Vlan [dec]. 

Explanation   

This message means that the interface has been deleted from VLAN. [chars] is the 

interface, and [dec] is the VLAN ID.

Recommended Action   

No action is required.

Error Message   

SPANTREE-7-RECV_1Q_NON_TRUNK: Received 802.1Q BPDU on non trunk 

[chars] [chars]. 

Explanation   

This message means that an SSTP BPDU was received on the listed interface, which is 

not an operational trunking interface. The first [chars] is the port name, and the second [chars] is the 
VLAN name.

Recommended Action   

Verify that the configuration and operational state of the listed interface and 

that of the interface to which it is connected are in the same mode (

access

 or 

trunk

). If the mode is 

trunk, verify that both interfaces have the same encapsulation (none or 802.1Q). When these 
parameters are consistent, spanning tree automatically unblocks the interface.

SPANTREE_FAST Messages

This section contains the spanning-tree fast-convergence message.

Error Message   

SPANTREE_FAST-7-PORT_FWD_UPLINK: [chars] [chars] moved to Forwarding 

(UplinkFast). 

Explanation   

This message means that the listed interface has been selected as the new path to the 

root switch for the listed spanning-tree instance. The first [chars] is the spanning-tree instance, and 
the second [chars] is the interface.

Recommended Action   

No action is required.

Summary of Contents for ME 2400











































































































Reviews:

No comments