2-55
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
OL-9641-04
Chapter 2 Messages and Recovery Procedures
PM Messages
Error Message
PM-4-NO_SUBBLOCK: No PM subblock found for [chars].
Explanation
This message means that the port manager failed to find the subblock for this interface.
[chars] is the interface name.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the
show
tech-support
user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
“Error Message Traceback Reports” section on page 1-3
.
Error Message
PM-4-PORT_BOUNCED: Port [chars] was bounced by [chars].
Explanation
This message means that during a switchover when the port was in the link-down state,
the port manager restarted the port. A port can be restarted only when the port data structures are
not consistent in the active and standby supervisors. Active ports in the link-down state are returned
to the link-up state when the port is restarted (the re-activation event). The first [chars] is the port
number, and the second [chars] is the re-activation event.
Recommended Action
No action is required.
Error Message
PM-4-PVLAN_TYPE_CFG_ERR: Failed to set VLAN [dec] to a [chars] VLAN.
Explanation
This message means that the platform failed to set a private VLAN type. [dec] is the
VLAN ID.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the
show
tech-support
user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
“Error Message Traceback Reports” section on page 1-3
.
Error Message
PM-4-TOO_MANY_APP: application ’[chars]’ exceeded registration limit.
Explanation
This message means that the port manager detected an invalid request. [chars] is the
application.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the
show
tech-support
user EXEC command to gather data that might help identify the nature of the error. If
you still require assistance, open a case with the TAC, or contact your Cisco technical support
representative, and provide the representative with the gathered information. For more information
about these online tools and about contacting Cisco, see the
“Error Message Traceback Reports”
section on page 1-3
.