c) Set up the speed dial information.
d) Select
Save
.
Step 15
Configure Cisco IP Phone services and assign services. Select
Device
>
Device Settings
>
Phone Services
.
Provides IP Phone services to the phone.
Users can add or change services on their phones using the Cisco Unified Communications Self Care
Portal.
Note
Step 16
(Optional) Assign services to programmable buttons. Select
Device
>
Device Settings
>
Phone button
template
.
Provides access to an IP phone service or URL.
Step 17
Add user information to the global directory for Cisco Unified Communications Manager. Select
User
Management
>
End User
, and then click
Add New
and configure the required fields. Required fields are
indicated by an asterisk (*).
If your company uses a Lightweight Directory Access Protocol (LDAP) directory to store information
on users, you can install and configure Cisco Unified Communications to use your existing LDAP
directory, see
Corporate Directory Setup, on page 167
. After the Enable Synchronization from the
LDAP Server field is enabled, you will not be able to add additional users from Cisco Unified
Communications Manager Administration.
Note
a) Set the User ID and last name fields.
b) Assign a password (for Self Care Portal).
c) Assign a PIN (for Cisco Extension Mobility and Personal Directory).
d) Associate the user with a phone.
Provides users with control over their phone such a forwarding calls or adding speed-dial numbers or
services.
Some phones, such as those in conference rooms, do not have an associated
user.
Note
Step 18
Associate a user with a user group. Select
User Management
>
User Settings
>
Access Control Group
.
Assigns users a common list of roles and permissions that apply to all users in a user group. Administrators
can manage user groups, roles, and permissions to control the level of access (and, therefore, the level of
security) for system users. For more information, see
Add User to End User Group, on page 51
.
In order for end users to access the Cisco Unified Communications Self Care Portal, you must add users to
the standard Cisco Communications Manager End Users group.
Related Topics
Cisco Unified Communications Manager Documentation, on page xiii
Determine Phone MAC Address
To add phones to the Cisco Unified Communications Manager, you must determine the MAC address of a
Cisco IP Phone.
Procedure
Perform one of the following actions:
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
47
Determine Phone MAC Address
