Power button/power status LED
2
Drive bays
Supports two SATA SSDs in slots 1 and 2
Supports six SAS HDDs in slots 3 through 8
1
System status LED
4
Unit identification button/LED
3
Fan status LED
6
Power supply status LED
5
Temperature status LED
8
Network link activity LED
7
Keyboard, video, and mouse (KVM) port
10
Pullout asset card
9
Front Panel LEDs
The following figure shows the front panel LEDs and describes their states.
Figure 5: Front Panel LEDs and Their States
Drive activity LED:
• Off—There is no drive in the
drive tray (no access, no fault).
• Green—The drive is ready.
• Green, flashing—The drive is
reading or writing data.
2
Drive fault LED:
• Off—The drive is operating properly.
• Amber—Drive fault detected.
• Amber, flashing—The drive is rebuilding.
• Amber, flashing with 1-second interval—Drive locate
function activated in the software.
1
Cisco Threat Grid M5 Hardware Installation Guide
6
Overview
Front Panel LEDs
