Cisco Linksys RVL200 User Manual Download Page 65

Page: 65 / 118

Virtual Passage SSL VPN Client

4-Port SSL/IPSec VPN Router

Appendx B

Deselect (remove the checkmark from)

Overrde

automatc cooke handlng

Internet Explorer > Internet Options > Privacy

Click

again.

Netscape Communicator 8.0 or Higher

Open

Netscape Communcator

Click

Tools

Click

Optons

Click

Ste Controls

Click the

Trust Preferences

tab.

In the Master Settings section, click

I’m Not Sure

Click

Allow cookes

Click

Enable JavaScrpt

Click

Advanced

Click

Enable ActveX

Netscape Communicator > Options > Site Controls > Web Features

Click

Under Options, click

Advanced

Click

Securty

13.

14.
15.

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

11.
12.
13.

Select

Use SSL .0

and

Use SSL .0

Netscape Communicator > Options > Advanced > Security

Click

Make the SSL VPN Portal a Trusted Site

(Windows OS)

Most web browsers support multiple security zones with

different permission levels. Trusted sites have a lower

security setting that will allow the Java and ActiveX

content to work properly. If your web browser’s security

settings are set to High, you may need to add the SSL VPN

Portal to your browser’s list of trusted sites.
The following instructions are provided for Internet

Explorer. For Netscape Communicator, refer to its Help

section for details.

Open

Internet Explorer

Go to the SSL VPN Portal as a trusted site.
Press

Alt + D

to select the SSL VPN Portal address, and

press

Ctrl + C

to copy it to the Windows Clipboard.

Click

Tools

Click

Internet Optons

Click the

Securty

tab.

Click

Trusted stes

Click the

Stes

button.

The

Trusted sites

screen appears. In the

Add this Web

site to the zone

field, press

Ctrl + V

to paste in the SSL

VPN Portal web address.
Click

Add

Click

again.

14.

15.

1.
2.
3.

4.
5.
6.
7.
8.
9.

10.
11.
12.

Summary of Contents for Linksys RVL200























































































































Search results

Summary of Contents for Linksys RVL200

Reviews:

Cisco Linksys RVL200, User Manual, Page: 65 / 118

Search results

Summary of Contents for Linksys RVL200

Reviews: