Chapter 4
Advanced Configuration
4
4-Port SSL/IPSec VPN Router
Securty Model
Select the version of SNMP the group
uses:
SNMPv
,
SNMPv
, or
SNMPv
.
Securty Level
This option is available if SNMPv3 is
selected for the Security Model. Select
No Authentcaton
if no authentication or privacy security levels are
specified. Select
Authentcaton
if SNMP message origins
are authenticated. Select
Prvacy
SNMP messages are
authenticated and encrypted.
Operaton
Select
Read
if you want the group to have
read-only access to the assigned SNMP view; the group
cannot change the assigned SNMP view. Then select the
appropriate SNMP view.
Select
Wrte
if you want the group to have read/write
access to the assigned SNMP view; the group can change
the assigned SNMP view. Then select the appropriate
SNMP view.
Click
Add to Lst
, and configure as many entries as you
would like, up to a maximum of 15. To delete an entry,
select it and click
Delete
.
Click
Save Settngs
to save your changes, or click
Cancel
Changes
to undo them.
SNMP > Group Membership
Assign users to specific SNMP groups.
SNMP > Group Membership
Group Membership
Membership Table
User Name
Enter a name for the user.
Engne ID
Select
Local
if the user is connected to a local
SNMP entity.
Select
Remote
if the user is connect to a remote SNMP
entity. Then enter the remote engine ID.
Group Name
Select a group for the user.
Authentcaton Method
Select the appropriate method:
MD Password
,
SHA Password
,
MD Key
, or
SHA
Key
.
Password
If MD5 or SHA1 Password is selected, then
only the password will be used for authentication. Enter
the password. Its length must be equal to or larger than
8 bytes.
Key
If MD5 or SHA1 Key is selected, then the authentication
key and privacy key will be used for authentication. Enter
the authentication key and privacy key. The length of the
MD5 authentication key must be 16 bytes. The length of
the SHA authentication key must be 20 bytes. The length
of the privacy key must be 8 bytes.
Click
Add to Lst
, and configure as many entries as you
would like, up to a maximum of 30. To delete an entry,
select it and click
Delete
.
Click
Save Settngs
to save your changes, or click
Cancel
Changes
to undo them.
SNMP > Communities
Define the SNMPv1/v2c users.
SNMP > Communities
Communities
SNMP Management Staton
Select the top option to
specify an IP address. Then enter the IP address of this
community name.
Select
All
to specify all IP addresses for all management
stations.
Communty Strng
Enter the password used to
authenticate the management station to the Router.