Network
Status of the network ports.
Link status (L):
• Off—No link, or port is not in use.
• Green—Link established.
• Green, flashing—Link activity.
4
Active
Status of the failover pair:
• Off— Failover is not operational.
• Green—Failover pair operating normally.
The LED is green always unless the chassis
in a high availability pair.
• Amber—When the chassis is in a high
availability pair, the LED is amber for the
standby unit.
3
Network
Status of the network ports.
Connection-speed status (S):
• Green, flashing—One flash every three
seconds = 10 Mbps.
• Green, flashing—Two rapid flashes = 100
Mbps.
• Green, flashing—Three rapid flashes = 1000
Mbps.
5
Hardware Specifications
The following table contains hardware specifications for the Firepower 1010.
Table 2: Firepower 1010 Hardware Specifications
1.82 x 7.85 x 8.07 in. (4.62 x 19.94 x 20.50 cm)
Dimensions (H x W x D)
3 lb (1.36 kg)
Weight
30 W
Not including any PoE devices connected to the chassis. 55 W is the maximum
power for the power supply.
PoE+ is first supported in Firepower Version 6.5.
Note
Use the power supply (part number 341-100765-01) that shipped with
the chassis. It supports PoE+.
Note
System power
Operating: 32 to 104
⁰
F (0 to 40
⁰
C)
Derate the maximum operating temperature 1.5
⁰
C per 1000 ft above sea level.
Nonoperating: -13 to 158°F (-25 to 70°C) maximum altitude is 40,000 ft
Temperature
Cisco Firepower 1010 Hardware Installation Guide
9
Overview
Hardware Specifications
