Device Management
Configuring the ViewMaster
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
330
10
-
Block All Traffic Except Email:
Blocks all traffic except email through the
WAN interface when the traffic limit is reached.
•
Send email alert:
Click
On
to send an alert email to the specific email
account when the traffic limit is reached, or click
Off
to disable it. This feature
requires that you enable the Email Alert feature in the Log Settings page. See
STEP 5
In the
Internet Traffic Statistics
area, the following information is displayed if you
enable the traffic metering:
STEP 6
Click
Save
to apply your settings.
Configuring the ViewMaster
ViewMaster is a network monitoring and management protocol. If you enable
ViewMaster, the devices accept the HTTP or HTTPS connections with the Local
Management Agent that is embodied in the security appliance.
STEP 1
Click
Device Management ->
ViewMaster
.
The ViewMaster window opens.
Start Date/Time
The date on which the traffic meter was started or the last
time when the traffic counter was reset.
Outgoing Traffic
Volume
The volume of traffic in Megabytes that was uploaded
through this interface.
Incoming Traffic
Volume
The volume of traffic in Megabytes that was downloaded
through this interface.
Average per day
The average volume of traffic that passed through this
interface.
% of Standard
Limit
The amount of traffic in percent that passed through this
interface against the monthly limit.
% of this
Month’s Limit
The amount of traffic in percent that passed through this
interface against this month’s limit (if the month’s limit has
been increased).
