Device Management
Configuring the Time Zone
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
320
10
•
Secondary RADIUS Server IP:
Enter the IP address of the secondary
RADIUS server.
•
Secondary RADIUS Server Port:
Enter the port number on the secondary
RADIUS server that is used to send the RADIUS traffic. The default is 1812.
•
Secondary RADIUS Server Pre-shared Key:
Enter the pre-shared key that
is configured on the secondary RADIUS server.
STEP 4
Click
OK
to save your settings.
STEP 5
Repeat the above steps to edit the settings for other RADIUS groups if needed.
STEP 6
Click
Save
to apply your settings.
Configuring the Time Zone
Use the Time Zone / Clock Settings page to manually configure the time zone and
clock settings, or to dynamically synchronize the time zone and clock settings with
the Network Time Protocol (NTP) server.
STEP 1
Click
Device Management ->
TimeZone / Clock Settings
.
The Time Zone and Clock Settings window opens.
STEP 2
Click
Manual
to manually set the date and time. Enter the values in the
Date
and
Time
fields.
STEP 3
Click
Dynamic
to automatically synchronize the date and time with the NTP
server:
•
Date/Time:
Choose the time zone relative to Greenwich Mean Time (GMT).
•
Automatically Adjust for Daylight Savings Time:
Click
On
to automatically
adjust the time for Daylight Savings Time, or click
Off
to disable it.
•
Use Default NTP Servers:
Click this option to use the default Network Time
Protocol (NTP) server.
