Getting Started
Installation
Cisco ISA500 Series Integrated Security Appliance Administration Guide
20
1
•
Mechanical Loading:
Be sure that the security appliance is level and stable
to avoid any hazardous conditions.
To place the security appliance on a desktop, install the supplied four rubber feet
on the bottom of the security appliance. Place the security appliance on a flat
surface.
Wall Mounting
There is no wall-mounting kit included with your security appliance. We
recommend that you use the following screws to install your security appliance to
the wall or the ceiling:
WARNING
Insecure mounting might damage the device or cause injury. Cisco is not
responsible for damages incurred by improper wall-mounting.
To mount the security appliance to the wall:
STEP 1
Determine where you want to mount the security appliance. Verify that the surface
is smooth, flat, dry, and sturdy.
STEP 2
Insert two 18.6 mm (0.73 inch) screws, with anchors, into the wall 234 mm apart
(9.21 inches). Leave 3 to 4 mm (about 1/8 inch) of the head exposed.
STEP 3
Place the security appliance wall-mount slots over the screws. Slide the security
appliance down until the screws fit snugly into the wall-mount slots.
1 8mm/0.32 in
2 25mm/0.98 in
3 6.5mm/0.26in
4 18.6mm/0.73in
1
2
4
3
19624
3
