Figure 17: Attaching the DIN Rail Bracket for horizontal mounting
Position the router with the front ports facing down for horizontal mounting.
Note
Step 2
Attach the DIN mounting bracket (
1
) to the router using the two screws provided in the kit (
2
). Position the bracket over
the two mounting holes (
3
) that correspond to your orientation. Then use 13-15 in. lbs. of torque to screw the bracket
onto the router.
Step 3
Once the bracket is attached to the router, it can be mounted onto the DIN Rail.
Attaching the Bracket onto the DIN Rail
To attach the Cisco IR101 with the bracket to a DIN rail, follow these steps. Refer to the following figure for
details.
IR1101 Industrial Integrated Services Router Hardware Installation Guide
34
Installing the Router
Attaching the Bracket onto the DIN Rail
