Cisco IP Phone 6841 Administration Manual Download Page 130

Page: 130 / 240

Configure Call Park with Star Codes

You can configure call park so that the user can put a call on hold and then retrieve the call from either the
user's phone or another phone.

When configuring call park, the Call Park Code and the Call Unpark Code must match the Feature Access
Code configured on the server.

Procedure

Step 1

On the Configuration Utility page, select

Admin Login

Advanced

Voice

Regional

Step 2

Enter

*68

in the

Call Park Code

field.

Step 3

Enter

*88

in the

Call Unpark Code

field.

Step 4

Click

Submit All Changes

Add Call Park to a Programmable Line Key

You can add call park to a line key to enable the user to temporarily store and retrieve calls. Call park is
supported on private lines and shared lines.

Procedure

Step 1

On the Configuration Utility page, select

Admin Login

Advanced

Voice

Phone

Step 2

Select a line key.

Step 3

Select

Disabled

to disable the extension.

Step 4

In the

Extended Function

field, enter a string in this format:

For a private line, enter fnc=park;sub=$USER@$PROXY;nme=CallPark-Slot1.

For a shared line, enter fnc=prk;sub=$USER@$PROXY;nme=Call-Park1;orbit=<DN of primary line>.

where:

•

fnc= prk means function=call park

•

sub= 999999 is the phone to which the call parks. Replace 999999 with a numbers.

•

nme= XXXX is the name displayed on the phone for the call park line key. Replace XXXX with a name.

Step 5

Click

Submit All Changes

Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide

116

Call Park

Summary of Contents for IP Phone 6841

















































































































































































































































Search results

Summary of Contents for IP Phone 6841

Reviews:

Brands by name

Popular brands

Cisco IP Phone 6841, Administration Manual

Search results

Summary of Contents for IP Phone 6841

Reviews:

Brands by name

Popular brands