Cisco IP DECT 6800 Series User Manual Download Page 60

Page: 60 / 96

Set a Recurrent Alarm

You can set your handset to remind you at a specific time each day with a recurrent alarm timer. You can set
only one recurrent alarm on the handset.

Procedure

Step 1

Press

Menu

Step 2

Select

Alarms

Recurrent Alarm

Step 3

Set the time for the alarm.

Press right or left on the Navigation ring

to move from field to field. Press up or down on the Navigation

ring to increment or decrement the field.

Step 4

Press

Save

Step 5

Highlight each day of the week for the alarm and press

Mark

Step 6

Press

Set the Snooze Time

When an alarm rings, you can press

Snooze

to make the alarm ring again at the configured time. By default,

the delay is 10 minutes, but you can set any delay from 1 minute to 10 minutes.

Procedure

Step 1

Press

Menu

Step 2

Select

Alarms

Snooze time

Step 3

Select the snooze time.

Step 4

Press

Select

Respond to an Alarm

At the configured alarm time, the handset rings and you respond to the alarm. If you are on a call, the alarm
doesn't ring through until you end the call.

Cisco IP DECT 6800 Series User Guide

Alarms, Alarm List, and F-Keys

Set a Recurrent Alarm

Summary of Contents for IP DECT 6800 Series

































































































Search results

Summary of Contents for IP DECT 6800 Series

Reviews:

Related manuals for IP DECT 6800 Series

Brands by name

Popular brands

Cisco IP DECT 6800 Series, User Manual

Search results

Summary of Contents for IP DECT 6800 Series

Reviews:

Related manuals for IP DECT 6800 Series

Brands by name

Popular brands