Cisco IEC 4610 User Manual Download Page 165

Page: 165 / 264

A-9

Cisco Interactive Experience Client 4600 Series User Guide

Appendix A Compatible Peripherals

Compatible Peripherals

Webcams

Webcams must be HID compliant, USB, and V4L compatible.

The following webcams have been tested with 2.3 and are supported:

•

Cisco PrecisionHD USB Firmware 1

•

Logitech HD Portable 1080p Webcam C615

•

Logitech C525

•

Lotitech C310

•

Logitech C920

Document Cameras

Document cameras must be USB and V4L compatible.

The following document cameras have been tested with 2.3 and are supported:

•

Vaddio CeilingVIEW HD-18 DocCAM with DVI/HDMI Quick-Connect

Video Encoder Dongles

The following video encoder dongles have been tested with 2.3 and are supported:

•

System Dimensions AVS 2610 Portable Adaptive Video Streamer for Live Events

Printers

Printers must be CUPS (abstraction library) compliant.

Cisco recommends the use of models that are 1+ years old.

Cisco recommends the use of more mature commercial-grade printers with longer lifespans.
Consumer-grade printers where the models change frequently are less likely to be supported. Please
consult

www.openprinting.org

for printer compatibility. Review the level of support for a printer, which

is indicated in the printer’s record.

The following printers have been tested with 2.3 and are supported:

•

Microcom 814M 8.5" HID-compliant thermal kiosk printer

•

HP LaserJet P3015

•

HP LaserJet P2035

•

HP P1606dn (The network feature is not supported. It can only print via a direct USB connection.)

HP printers should have HP Linux Imaging and Printing (HPLIP) 3.1 drivers (see

http://hplipopensource.com/hplip-web/supported_devices/index.html

)

Note

HP provides best Ubuntu compatibility.

Summary of Contents for IEC 4610









































































































































































































































































Search results

Summary of Contents for IEC 4610

Reviews:

Brands by name

Popular brands

Cisco IEC 4610, User Manual

Search results

Summary of Contents for IEC 4610

Reviews:

Brands by name

Popular brands