manualshive.com logo in svg

Cisco IE 4000, Software Configuration Manual

The Cisco IE 4000 is a powerful industrial Ethernet switch designed for seamless network connectivity in rugged environments. Experience optimal performance and reliability with its advanced features. Easily access the comprehensive user manual for this product, available for free download exclusively on our manualshive.com.

Share
Download
background image

593

   

Configuring QoS

QoS Treatment for Performance-Monitoring Protocols

When the 

cpu traffic qos dscp

 global configuration command is configured with table maps, you can configure only 

one 

map

 

from

 value at a time—DSCP, precedence, or CoS. A new configuration overwrites the existing configuration. 

Packets marked by this command can be classified and queued by an output policy map based on the marked DSCP 
or precedence value.

When the 

cpu traffic qos precedence

 global configuration command is configured with table maps, you can 

configure only one 

map

 

from

 value at a time—DSCP, precedence, or CoS. A new configuration overwrites the 

existing configuration. Packets marked by this command can be classified and queued by an output policy map 
based on the marked precedence or DSCP value.

You cannot configure a 

map

 

from

 value of both DSCP and precedence. A new configuration overwrites the existing 

configuration.    

When the 

cpu traffic qos cos 

global configuration command is configured with table maps, you can configure two 

map

 

from

 values at a time—CoS and either DSCP or precedence. 

If the 

cpu traffic qos cos 

global configuration command is configured with only a 

map

 

from

 value of DSCP or 

precedence:

—

The CoS value of IP packets is mapped by using the DSCP (or precedence) value in the packet and the 
configured table map. Packets can be classified and queued by an output policy map based on the marked CoS 
value.

—

The CoS value of non-IP packets remains unchanged.

If the 

cpu traffic qos cos 

global configuration command is configured with a 

map

 

from

 value of CoS:

—

The CoS value of IP packets is mapped by using the CoS value in the packet and the configured table map. 
Packets can be classified and queued by an output policy map based on the marked CoS value.

—

The CoS value of non-IP packets is mapped by using the CoS value in the packet and the configured table map. 
Packets can be classified and queued by an output policy map based on the marked CoS value.

If the 

cpu traffic qos cos 

global configuration command is configured with a 

map

 

from

 value of DSCP or 

precedence and CoS:

—

The CoS value of IP packets is mapped by using the DSCP or precedence value in the packet and the configured 
table map. Packets can be classified and queued by an output policy map based on the marked CoS value. 

—

The CoS value of non-IP packets is mapped by using the CoS value in the packet and the configured table map. 
Packets can be classified and queued by an output policy map based on the marked CoS value. 

The 

cpu traffic qos qos-group

 global configuration command can be used to configure QoS group marking for 

CPU-generated traffic only for a specific QoS group. The 

table-map

 option is not available.

Congestion Management and Scheduling

Cisco Modular QoS CLI (MQC) provides several related mechanisms to control outgoing traffic flow. They are 
implemented in output policy maps to control output traffic queues. The scheduling stage holds packets until the 
appropriate time to send them to one of the four traffic queues. Queuing assigns a packet to a particular queue based 
on the packet class, and is enhanced by the WTD algorithm for congestion avoidance. You can use different scheduling 
mechanisms to provide a guaranteed bandwidth to a particular class of traffic while also serving other traffic in a fair way. 
You can limit the maximum bandwidth that can be consumed by a particular class of traffic and ensure that 
delay-sensitive traffic in a low-latency queue is sent before traffic in other queues.

The switch supports these scheduling mechanisms:

Traffic shaping 

Summary of Contents for IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IE 4000

C&H Technologies EM405-8 Manual preview
EM405-8
Brand: C&H Technologies Pages: 46
D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manual preview
AirPlus XtremeG Ethernet-to-Wireless Bridge...
Brand: D-Link Pages: 31
WolfPack 18x18 Card Cage User Manual preview
18x18 Card Cage
Brand: WolfPack Pages: 31
Hamlet HRDSL742 User Manual preview
HRDSL742
Brand: Hamlet Pages: 122
Pakedge Device & Software RK-1 Quick Start Manual preview
RK-1
Brand: Pakedge Device & Software Pages: 14
Patton electronics ipRocketLink 3086FR Quick Start Manual preview
ipRocketLink 3086FR
Brand: Patton electronics Pages: 12
3Com 3C433279A Release Note preview
3C433279A
Brand: 3Com Pages: 12
Idis DR-2308P Quick Manual preview
DR-2308P
Brand: Idis Pages: 18
hilscher netHOST NHST-T100 User Manua preview
netHOST NHST-T100
Brand: hilscher Pages: 75
Rosco ND100 User Manual preview
ND100
Brand: Rosco Pages: 20
DPS KDA 864 User Manual preview
KDA 864
Brand: DPS Pages: 57
Dialogic IP Board IPT10000C Quick Install Card preview
IP Board IPT10000C
Brand: Dialogic Pages: 2
Lanner ECA-4027 User Manual preview
ECA-4027
Brand: Lanner Pages: 99
BinTec BinGO! DSL II Quick Install Manual preview
BinGO! DSL II
Brand: BinTec Pages: 2
Paradyne Hotwire 5620 RTU Installation Instructions Manual preview
Hotwire 5620 RTU
Brand: Paradyne Pages: 20
Comtrend Corporation AR-5319 User Manual preview
AR-5319
Brand: Comtrend Corporation Pages: 208
Dynamix DV-24 User Manual preview
DV-24
Brand: Dynamix Pages: 87
Cabletron Systems TRXMIM-24A User Manual preview
TRXMIM-24A
Brand: Cabletron Systems Pages: 56

Brands by name

Popular brands

Load more brands