manualshive.com logo in svg

Cisco IE 4000, Software Configuration Manual

The Cisco IE 4000 is a powerful industrial Ethernet switch designed for seamless network connectivity in rugged environments. Experience optimal performance and reliability with its advanced features. Easily access the comprehensive user manual for this product, available for free download exclusively on our manualshive.com.

Share
Download
background image

275

   

Configuring VLANs

VLANs

Token Ring TrCRF VLANs

For more information on configuring Token Ring VLANs, see the 

Catalyst 6500 Series Software Configuration Guide

.

Normal-Range VLAN Configuration Guidelines 

Follow these guidelines when creating and modifying normal-range VLANs in your network:

The switch supports 1005 VLANs in VTP client, server, and transparent modes. 

Normal-range VLANs are identified with a number between 1 and 1001. VLAN numbers 1002 through 1005 are 
reserved for Token Ring and FDDI VLANs.

VLAN configuration for VLANs 1 to 1005 are always saved in the VLAN database. If the VTP mode is transparent, 
VTP and VLAN configuration are also saved in the switch running configuration file.

With VTP versions 1 and 2, the switch supports VLAN IDs 1006 through 4096 only in VTP transparent mode (VTP 
disabled). These are extended-range VLANs and configuration options are limited. Extended-range VLANs created 
in VTP transparent mode are not saved in the VLAN database and are not propagated. VTP version 3 supports 
extended range VLAN (VLANs 1006 to 4096) database propagation. If extended VLANs are configured, you cannot 
convert from VTP version 3 to version 1 or 2. See 

Creating an Extended-Range VLAN, page 285

.

Before you can create a VLAN, the switch must be in VTP server mode or VTP transparent mode. If the switch is a 
VTP server, you must define a VTP domain or VTP will not function.

The switch does not support Token Ring or FDDI media. The switch does not forward FDDI, FDDI-Net, TrCRF, or 
TrBRF traffic, but it does propagate the VLAN configuration through VTP.

The switch supports 128 spanning-tree instances. If a switch has more active VLANs than supported spanning-tree 
instances, spanning tree can be enabled on 128 VLANs and is disabled on the remaining VLANs. If you have already 
used all available spanning-tree instances on a switch, adding another VLAN anywhere in the VTP domain creates 
a VLAN on that switch that is not running spanning-tree. If you have the default allowed list on the trunk ports of that 
switch (which is to allow all VLANs), the new VLAN is carried on all trunk ports. Depending on the topology of the 
network, this could create a loop in the new VLAN that would not be broken, particularly if there are several adjacent 
switches that all have run out of spanning-tree instances. You can prevent this possibility by setting allowed lists on 
the trunk ports of switches that have used up their allocation of spanning-tree instances.

If the number of VLANs on the switch exceeds the number of supported spanning-tree instances, we recommend 
that you configure the IEEE 802.1s Multiple STP (MSTP) on your switch to map multiple VLANs to a single 
spanning-tree instance. For more information about MSTP, see 

Configuring MSTP, page 333

Default Ethernet VLAN Configuration

Note: 

The switch supports Ethernet interfaces exclusively. Because FDDI and Token Ring VLANs are not locally 

supported, you only configure FDDI and Token Ring media-specific characteristics for VTP global advertisements to other 
switches.

Summary of Contents for IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IE 4000

D-Linke DHP-346AV Quick Installation Manual preview
DHP-346AV
Brand: D-Linke Pages: 32
D-Link DSR-500 User Manual preview
DSR-500
Brand: D-Link Pages: 213
Clavister NetWall W20A Getting Started Manual preview
NetWall W20A
Brand: Clavister Pages: 89
Garland EdgeLens INT10G8LR56 User Manual preview
EdgeLens INT10G8LR56
Brand: Garland Pages: 30
Macsense MPC-200 User Manual preview
MPC-200
Brand: Macsense Pages: 13
Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual preview
NetIron MLXe Series
Brand: Brocade Communications Systems Pages: 305
Aethra AS1241 Technical Specifications preview
AS1241
Brand: Aethra Pages: 2
YATO YT-82380 Original Instructions Manual preview
YT-82380
Brand: YATO Pages: 96
ActionTec GT704WR User Manual preview
GT704WR
Brand: ActionTec Pages: 115
3Com EtherLink 3C905C-TX User Manual preview
EtherLink 3C905C-TX
Brand: 3Com Pages: 96
Intercoax IXWB-450 Quick Start Manual preview
IXWB-450
Brand: Intercoax Pages: 2
BinTec BIANCA/BRI Getting Started preview
BIANCA/BRI
Brand: BinTec Pages: 34
National Instruments Monochrome Image Acquisition Device NI 1410 User Manual preview
Monochrome Image Acquisition Device NI 1410
Brand: National Instruments Pages: 34
Multi-Link Power Stone Programming Manual preview
Power Stone
Brand: Multi-Link Pages: 31
MicroNova O047 Technical Installation Manual preview
O047
Brand: MicroNova Pages: 113
Billion BIPAC 7100G Quick Start Manual preview
BIPAC 7100G
Brand: Billion Pages: 14
Aztech na8300 Easy Start preview
na8300
Brand: Aztech Pages: 13
Multitech ROUTE FINDER RFIPSC-1 Quick Start Manual preview
ROUTE FINDER RFIPSC-1
Brand: Multitech Pages: 54

Brands by name

Popular brands

Load more brands