manualshive.com logo in svg

Cisco FMC 1600, Hardware Installation Manual, Page: 20 / 44

Share
Download
Cisco FMC 1600 Hardware Installation Manual Download Page 20

Table 4: FMC 1600, 2600, and 4600 PIDs

Description

PID

AC power supply

FMC-M5-PS-AC-770W

AC power supply (spare)

FMC-M5-PS-AC-770W=

FMC 1600 and 4600 1.2-TB drive

FMC-M5-HDD-1.2TB

FMC 1600 and 4600 1.2-TB drive (spare)

FMC-M5-HDD-1.2TB=

FMC 2600 600-GB drive

FMC-M5-HDD-600G

FMC 2600 600-GB drive (spare)

FMC-M5-HDD-600G=

Rail kit

UCSC-RAILB-M4

Power Cord Specifications

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the FMC 1600, 2600, and 4600. The jumper power cords for use in racks are available as an
optional alternative to the standard power cords.

If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.

Only the approved power cords and jumper cords provided with the FMC 1600, 2600, and 4600 are supported.

Note

The following power cords and jumper cords are supported.

Figure 10: Argentina CAB-250V-10A-AR

Cord set rating: 10 A, 250 V

2

Plug: IRAM 2073

1

Connector: IEC 60320/C13

3

Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide

16

Overview

Power Cord Specifications

Summary of Contents for FMC 1600













































Reviews:

No comments