Figure 32. Advanced Tools window (Bandwidth test tool)
Click the
3.
Run
button to the right of the IP address field.
• The bandwidth test result will be shown below the test
controls.
Using the Path MTU discovery tool
The Path MTU discovery tool tests the size of the maximum transmission
unit (in other words, the largest protocol data unit that can be
communicated in a single network layer transaction).
To use the Path MTU discovery tool, do the following steps:
1.
Determine what wireless link is to be tested between the
Cisco unit and another unit in the wireless network. Get theIP
address of the other unit.
2.
Enter the IP address of the second unit in the
Path MTU
discovery
).
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 87 of 176
