Product ID Numbers
The following table lists the field-replaceable PIDs associated with the Firepower 1010. The spare components
are ones that you can order and replace yourself. If any internal components fail, you must get a return material
authorization (RMA) for the entire chassis. See the
for more information.
See the
show inventory
command in the
Cisco Firepower Threat Defense Command Reference
or the
to display a list of the PIDs for your Firepower 1010.
Note
Table 3: Firepower 1010 PIDs
Description
PID
Cisco Firepower 1010 NGFW desktop appliance
FPR1010-NGFW-K9
Cisco Firepower 1010 accessory kit
FPR1K-DT-ACY-KIT
Cisco Firepower 1010 150-W power supply
FPR1K-DT-PWR-AC
Cisco Firepower 1010 150-W power supply (spare)
FPR1K-DT-PWR-AC=
Cisco Firepower 1010 rack-mount kit (spare)
FPR1K-DT-RACK-MNT=
Cisco Firepower 1010 wall-mount kit (spare)
FPR1K-DT-WALL-MNT=
Cisco Firepower 1010 FIPS kit (spare)
FPR1K-DT-FIPS-KIT=
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the security appliance. The jumper power cords for use in racks are available as an optional
alternative to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Only the approved power cords or jumper power cords provided with the chassis are supported.
Note
The following power cords are supported.
Cisco Firepower 1010 Hardware Installation Guide
12
Overview
Product ID Numbers
