4.
A welcome message is displayed.
More information
The CLI commands for Expressway are detailed in the
Cisco Expressway Administrator Guide
Next Steps
From the Expressway user interface, follow the steps described in the
Cisco Expressway Basic Configuration
to set up the Expressway. The process is briefly summarized here, but please refer to the
other guide for details before you continue:
Step 1
The first time you log in, the Service Setup Wizard launches. The wizard is used to select specific licensing requirements
for a deployment, and if necessary to change the default Expressway-C configuration to an Expressway-E.
Step 2
After the Service Setup Wizard, you go on to configure Expressway:
a.
System configuration, including the System Name, DNS settings, server certificate, NTP servers, SIP domains).
b.
Routing configuration, including transforms, search rules, and zones.
c.
Endpoint registration.
d.
System verification checks.
e.
Maintenance and optional configuration tasks.
Cisco Expressway CE1200 Appliance Installation Guide (14.0)
30
Access the Expressway User Interface
Next Steps
