4015258 Rev B
63
How Do I Configure the Wireless Home Gateway?
Setup Basic Settings - Enable/Disable Time Synchronization by
Network Time Protocol Page Description
The following table provides a description of the fields within the Basic Settings
Enable/Disable time synchronization by Network Time protocol page.
Field Name
Description
Current System Time
Displays the current system time and date
Network Time Protocol
Allows you to enable or disable network time
protocol
Note:
The gateway will automatically use the time
server in your broadband network. Should there
be no current time displayed or if the network
time is incorrect, enable Network Time Protocol to
use a public Internet time server to set the clock in
the gateway.
Latest Update Success
Displays the time and date of the last successful
time update
Time Zone
Displays the current time zone. The drop-down
list allows you to select your local time zone.
Daylight Saving Time
Allows you to adjust the time during periods
when Daylight Saving Time is in effect. Check the
Enable
box to enable or disable this setting.
Note:
If the offset for Daylight Savings Time is
other than 60 minutes, enter the offset in the
minutes field.
Time Server
Add and delete time server URLs or IP addresses
to and from the list, as required. When using
Network Time Protocol, multiple time servers can
be specified for the gateway to query for time of
day. The gateway will sequentially step through
the listed time servers until it acquires the current
time. There are three well known public time
servers entered as default servers.
Function Keys
Key
Description
Apply
Saves all additions, edits, and changes
Add Server
Allows you to add a network time server
Remove Server
Allows you to remove a network time server
