Cisco E4200, User Manual, Page: 167 / 761

3
Product overview Linksys E-Series
E4200
Top view
Indicator light
•
Indicator light
—Stays on steadily while power is connected and
following a successful Wi-Fi Protected Setup connection Pulses slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection Flashes quickly when there is a Wi-Fi Protected Setup
error
Back view
Ethernet ports
Wi-Fi Protected Setup button
Internet port Power port
Reset button
USB port
•
Ethernet ports
—Connect Ethernet cables (also called network cables)
to these Gigabit (10/100/1000) ports, color coded blue, and to other
wired Ethernet network devices on your network
•
Internet port —Connect an Ethernet cable (also called a network or
Internet cable) to this port, color coded yellow, and to your modem
•
Wi-Fi Protected Setup™ button
—Press this button to easily configure
wireless security on Wi-Fi Protected Setup-enabled network devices For
more information, see “Wireless Security” on page 9
•
USB port —To easily share disk storage with other users on your network
or on the Internet, connect a USB drive to this port
•
Reset button —Press and hold this button for 5-10 seconds (until the
port lights flash at the same time) to reset the router to its factory defaults
You can also restore the defaults using the browser-based utility
•
Power
—Connect the included AC power adapter to this port
CAUTION
Use only the adapter that came with your router
•
Power button
—Press
|
(on) to turn on the router