Cisco DX600 series User Manual Download Page 67

Page: 67 / 148

Switch between calls on one line

Procedure

Step 1

Highlight the call you want to switch to.

Step 2

Tap

Resume

Any active call is placed on hold and the selected call resumes.

Switch between calls on different lines

Procedure

Step 1

Select the line that you are switching to.
If a single call is holding on the line, the call automatically resumes.

Step 2

If multiple calls are holding, highlight the appropriate call and tap

Resume

Switch from active call to answer ringing call

Procedure

Perform one of the following actions:

•

Tap

Answer

•

If the call is ringing on a different line, select that line.

The phone places the active call on hold and the selected call resumes.

Remove call from hold on current line

Procedure

Step 1

Highlight the appropriate call.

Step 2

Tap

Resume

Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)

OL-28931-01

Calling tasks

Multiple calls

Summary of Contents for DX600 series





















































































































































Search results

Summary of Contents for DX600 series

Reviews:

Related manuals for DX600 series

Brands by name

Popular brands

Cisco DX600 series, User Manual

Search results

Summary of Contents for DX600 series

Reviews:

Related manuals for DX600 series

Brands by name

Popular brands