Cisco DX600 series User Manual Download Page 53

Page: 53 / 148

•

If the conference initiator disconnects, the conference call continues until all participants hang up.

Start Meet Me conference

Participants cannot join the conference until the initiator starts the conference.

Procedure

Step 1

Obtain a Meet Me phone number from your system administrator.

Step 2

Distribute the number to participants.

Step 3

When you are ready to start the meeting, go off-hook to get a dial tone, then tap

Meet Me

Step 4

Dial the Meet Me conference number.
Participants can now join the conference by dialing the Meet Me number.

Join Meet Me conference

Procedure

Step 1

Dial the Meet Me conference number that the conference initiator provides.

Step 2

If you hear a busy tone, the conference initiator has not joined the conference. Wait a minute and then try
your call again.

Conference participants list

During a standard (ad hoc) conference, you can view a list of participants and remove participants.

Control conference with participants list

The conference participants list displays conference participants.

Procedure

Step 1

Tap

Conference List

Participants are listed in the order in which they join the conference with the most recent additions at the top.

Step 2

To remove any conference participant, highlight the participant and tap

End Call

You can remove participants only if you initiated the conference call.

Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1)

OL-28931-01

Calling tasks

Conference calls

Summary of Contents for DX600 series





















































































































































Search results

Summary of Contents for DX600 series

Reviews:

Related manuals for DX600 series

Brands by name

Popular brands

Cisco DX600 series, User Manual

Search results

Summary of Contents for DX600 series

Reviews:

Related manuals for DX600 series

Brands by name

Popular brands