Setting Password
4030765 Rev 01
25
Setting Password
To set the password for the residential gateway, complete the following steps.
1
Click
System
on the main screen. The System Summary window opens.
2
Under the Admin section on the screen, click
Password Setting
. The Access
Control -- Password screen opens.
3
In the Username field, select one of the following options for the user name:
admin. Allows unrestricted access to change and view the configuration of
the residential gateway. This login allows access to privileged information.
support. Allows an ISP technician to access your residential gateway for
maintenance and to run diagnostics
user. Allows access to view configuration settings and statistics, as well as, to
update the residential gateway's software.
4
In the
Old Password
field, enter the old password you have been using.
5
In the
New Password
field, enter the new password.
6
In the
Confirm Password
field, enter the new password again to confirm it.
7
Click
Save/Apply
to save your user name and password.
3-6-2009 Draft
Summary of Contents for DDR2201 Series
Page 2: ...3 6 2009 Draft ...
Page 32: ...3 6 2009 Draft ...
