![background image](http://html.mh-extra.com/html/cisco/ddr2201-series/ddr2201-series_installation-and-operation-manual_64874042.webp)
Chapter 3 Configuration and Operation
24
4030765 Rev 01
Setting System Date and Time
When you first set up your system with the wizard, you set your systems date and
time. At a later time, you may need to reset the date and time, and you can use the
following procedure.
To set the system date and time, complete the following steps.
1
Click
System
on the main screen. The System Summary window opens.
2
Under the Admin section on the screen, click
NTP Server Setting
. The Time
Settings screen opens.
3
Make sure the Automatically synchronize with Internet time servers check box is
checked.
4
In the
First NTP time server
field, select clock.fmt.he.net from the drop-down
list.
5
In the
Second NTP time server
field, select time.nist.gov from the drop-down
list.
6
In the Time zone offset field, select the time zone that you want to use from the
drop-down list.
7
Click
Save/Apply
to save your settings.
3-6-2009 Draft
Summary of Contents for DDR2201 Series
Page 2: ...3 6 2009 Draft ...
Page 32: ...3 6 2009 Draft ...