Startup Screen
OL-31980-01
39
Startup Screen
Main Structure
On power-up and initialization, the startup screen is displayed similar to that shown
below. The screen also indicates the signal status.
Channel Authorization Status
From the startup screen, press the right or left arrow keys on the front panel keypad
to move to the PE entry authorization status screen. This screen indicates whether
the selected channel is authorized.
Auth Status
Description
Y
Indicates the channel is authorized.
N
Indicates the channel is not authorized.
LCD Panel
The LCD panel displays basic signal and program information in the LCD display,
as described in the following illustration:
LCD Setting
Description
PE
Program Entry.
The transcoder supports eight Program Entries (PE1 to
PE8). PE1 is the decode channel and is available at the
analog outputs. PE2 to PE8 are available for the
transcoded channels on the ASI and MPEG over IP
outputs.
12345
Channel for program monitoring.
Channel name
Name of the monitored program.
RF
Active RF input port.
Note:
ASI will be shown if the ASI input port is active.
