Chapter 2 Quick Setup - Read Me First!
16
OL-31980-01
Setting up the ASI Output
1
Press
MENU
to move to the Main Menu.
2
Press
to move to the
Setup
menu. Press
SELECT
.
3
Press
to move to the
Outputs
menu. Press
SELECT
.
4
Press
to move to the
TS Out
menu. Press
SELECT
.
5
Press
SELECT
to access the
ASI
menu. Press . Press
SELECT
. Use
to select
the output mode. The factory default is "No Output". It is recommended to set
the
Output Mode
to
Transcoding
.
6
Press
SELECT
. Press
to select "YES" if requested to "RESYNC ALL?". Press
SELECT
.
7
Press
to move to
Descramble Mode
menu. Press
SELECT
. Use
to select the
scrambling mode. Press
SELECT
.
8
Press
to move to
Insert Null Packet
. Press
SELECT
. Use to change the
mode to Yes. Press
SELECT
.
9
Press
APPLY
. Press
SELECT
.
10
Press
MENU
five times to return to the startup menu.
