In this version of the Call Home feature, you can change the destination of the CiscoTAC-1 profile.
•
Message formatting
—
The message format used for sending the alert. The format options for a user-defined
destination profile are long-text, short-text, or XML. The default is XML. For the predefined CiscoTAC-1
profile, only XML is allowed.
•
Message size
—
The maximum destination message size. The valid range is 50 to 3,145,728 bytes. The
default is 3,145,728 bytes.
•
Reporting method
—
You can choose which data to report for a profile. You can enable reporting of
Smart Call Home data or Smart Licensing Data, or both. Only one active profile is allowed to report
Smart Licensing data at a time.
•
Anonymous reporting
—
You can choose for your customer identity to remain anonymous, and no
identifying information is sent.
•
Subscribing to interesting alert-groups
—
You can choose to subscribe to alert-groups highlighting your
interests.
This section contains the following subsections:
Creating a New Destination Profile
To create and configure a new destination profile, perform the following steps:
SUMMARY STEPS
1.
configure terminal
2.
call-home
3.
profile name
4.
[
no
]
destination transport-method
{
|
http
}
5.
destination address
{
email email-address
|
http url
}
6.
destination preferred-msg-format
{
long-text
|
short-text
|
xml
}
7.
destination message-size-limit bytes
8.
active
9.
reporting
{
all
|
smart-call-home-data
|
smart-licensing-data
}
10.
end
11.
show call-home profile
{
name
|
all
}
12.
show call-home smart-licensing
13.
show call-home smart-licensing statistics
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
237
Configuring Call Home for the Cisco CSR 1000v
Creating a New Destination Profile
