Purpose
Command or Action
(Optional) Displays group-to-PIM mode mapping.
show pim
[
ipv4
|
ipv6
]
group-map
[
ip-address-name
]
[
info-source
]
Step 8
Example:
RP/0/RP0/CPU0:router# show pim ipv4 group-map
(Optional) Displays PIM topology table information for a
specific group or all groups.
show pim
[
vrf vrf-name
] [
ipv4
|
ipv6
]
topology
[
source-ip-address
[
group-ip-address
] |
entry-flag
flag
|
interface-flag
|
summary
] [
route-count
]
Step 9
Example:
RP/0/RP0/CPU0:router# show pim topology
Configuring Native PIM BIDIR
Perform these steps to configure native PIM BIDIR.
SUMMARY STEPS
1.
configure
2.
ipv4 access-list name
3.
[
sequence-number
]
permit source
[
source-wildcard
]
4.
interface type interface-path-id
5.
{
ipv4
|
ipv6
}
address address mask
6.
router ospf 100
7.
nsf cisco
8.
area area_id
9.
interface type interface-path-id
10.
multicast-routing
[
address-family
{
ipv4
|
ipv6
}]
11.
nsf
12.
rate-per-route
13.
interface all enable
14.
router pim
[
address-family
{
ipv4
|
ipv6
}]
15.
rp-address ip-address
[
group-access-list
] [
bidir
]
16.
commit
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
71
Implementing Multicast Routing on Cisco IOS XR Software
Configuring Native PIM BIDIR