See the
Implementing Routing Policy
on Cisco ASR 9000 Series Router module of
Cisco IOS XR Routing
Configuration Guide for the Cisco CRS Router
for a list of the supported attributes and operations that are
valid for policy filtering.
Configuring the mLDP User Interface for LDP Opaque Global ID Using the Routing Policy
SUMMARY STEPS
1.
configure
2.
route-policy mldp_policy
3.
if mldp opaque global-id 32-bit decimal number then pass endif
4.
end-policy
5.
commit
6.
Use the show command to verify the configuration: show running-config route-policy mldp_policy
DETAILED STEPS
Purpose
Command or Action
Enters global configuration mode.
configure
Example:
RP/0/RP0/CPU0:router#
configure
Step 1
Enters the Route-policy configuration mode, where
you can define the route policy.
route-policy mldp_policy
Example:
RP/0/RP0/CPU0:router(config)#
route-policy mldp_policy
Step 2
Configures the mLDP global id to the specific
global-id.
if mldp opaque global-id 32-bit decimal number then pass
endif
Example:
RP/0/RP0/CPU0:router(config-rpl)# if mldp opaque
global-id then pass endif
Step 3
end-policy
Step 4
Example:
RP/0/RP0/CPU0:router(config-rpl)# end-policy
commit
Step 5
An example output is as shown:
Wed Jun 18 11:41:09.333 IST
Use the show command to verify the configuration: show
running-config route-policy mldp_policy
Step 6
route-policy mldp_policy
if mldp opaque global-id 10 then
pass
endif
end-policy
!
Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x
43
Implementing Multicast Routing on Cisco IOS XR Software
Multipoint Label Distribution Protocol Route Policy Map