Cisco Cisco ONS 15600 SDH, Troubleshooting Manual

Page: 251 / 318

3-3
Cisco ONS 15600 SDH Troubleshooting Guide, R8.0
July 2010
Chapter 3 Transient Conditions
3.2.1 Condition Characteristics
3.2.1 Condition Characteristics
Conditions include any problem detected on an ONS 15600 SDH shelf. They can include standing or
transient notifications. You can retrieve a snapshot of all currently raised conditions on the network,
node, or card in the CTC Conditions window or by using the RTRV-COND commands in Transaction
Language One (TL1).
Note Some cleared conditions are found on the History tab.
For a comprehensive list of conditions, refer to the Cisco ONS 15454 and Cisco ONS 15600 SDH TL1
Command Guide .
3.2.2 Condition States
The History tab state (ST) column indicates the disposition of the condition, as follows:
•
A raised (R) event is active.
•
A cleared (C) event is no longer active.
• A transient (T) event is automatically raised and cleared in CTC during system changes such as user
login, logout, and loss of connection to node view. Transient events do not require user action.
3.3 Transient Conditions
This section lists in alphabetical order all the transient conditions encountered in Software Release 8.0.
The description, entity, SNMP number, and SNMP trap accompany each condition.
3.3.1 ADMIN-DISABLE
The Disable Inactive User (ADMIN-DISABLE) condition occurs when the administrator disables the
user or the account is inactive for a specified period.
This transient condition does not result in a standing condition.
3.3.2 ADMIN-DISABLE-CLR
The Disable Inactive Clear (ADMIN-DISABLE-CLR) condition occurs when the administrator clears
the disable flag on the user account.
This transient condition does not result in a standing condition.
3.3.3 ADMIN-LOCKOUT
The Admin Lockout of User (ADMIN-LOCKOUT) condition occurs when the administrator locks a user
account.
This transient condition does not result in a standing condition.