D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
98
Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Administrator Guide
SerialPort settings
SerialPort Mode
Enable/disable the serial port (COM port).
Requires user role:
ADMIN
Value space:
<Off/On>
Off:
Disable the serial port.
On:
Enable the serial port.
Example:
SerialPort Mode: On
SerialPort BaudRate
Specify the baud rate (data transmission rate, bits per second) for the serial port. The default
value is 38400.
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1; Flow
control: None.
Requires user role:
ADMIN
Value space:
<9600/19200/38400/57600/115200>
Range:
Select a baud rate from the baud rates listed (bps).
Example:
SerialPort BaudRate: 38400
SerialPort LoginRequired
Determine if login shall be required when connecting to the serial port.
Requires user role:
ADMIN
Value space:
<Off/On>
Off:
The user can access the codec via the serial port without any login.
On:
Login is required when connecting to the codec via the serial port.
Example:
SerialPort LoginRequired: On
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings
