D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
25
Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Administrator Guide
Navigate to: Call Control
Controlling the far end camera
While in a call, you can control the remote participant’s
camera (far end) provided that:
• The
Conference FarEndControl Mode
setting is switched
On
on the far end video system.
• The far end camera has pan, tilt or zoom functionality.
Only the relevant controls will appear.
Far end camera control indicator
If this symbol is present, you can control
the remote participant’s camera.
Control the remote participant’s camera
1. Click the snapshot to show it in a larger window.
2. Place the cursor in the image to enable the controls.
3. Use the left and right arrows to pan the camera; the up and
down arrows to tilt it; and
+
and
-
to zoom in and out.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface
