D14636.13 Profile C60-C40 and Codec C60-C40 Administrator Guide TC7.0, DECEMBER 2013.
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
15
Cisco TelePresence System Codec C40/C60 and Profiles using C40/60
Administrator Guide
1. Connect to the video system
Open a web browser and enter the IP address of
the video system in the address bar.
To find the IP address (IPv4 or IPv6),
open the
Settings
*
menu on the Touch
controller and tap
System Information
;
or navigate to
Home > Settings >
System information
when using a remote
control and the on-screen menu.
2. Sign in
Enter the user name and password for your
video system and click
Sign In
.
The system is delivered with a default
user named
admin
with no password
(i.e. leave the
Password
field blank
when signing in for the first time).
We strongly recommend that you set
a password for the
admin
user, see
the next page.
Signing out
Hover the mouse
over your user
name and choose
Sign out
from the
drop-down list.
Accessing the web interface
The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In this chapter you will find information how to use the web
interface for system configuration and maintenance.
We recommend that you use the latest release of one of the
major web browsers.
* The
Settings
menu can be accessed from the drop down window
that appears when you tap the contact information in the upper, left
corner of the Touch controller.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface
