Cisco Cisco 7940 User Manual Download Page 88

Page: 88 / 186

Selective Call Forward

System Telephone Features

Cisco 7960/7940 Telephone User Guide

620-05600070B

Hang up.

Entering the Forwarding Destination Number

Press

*63

*83

NOTE:

On the 7960 MGCP phone, you may skip the next step.

Press the

Dial

soft key, or line or

SPEAKER

button, or pickup the handset.

A voice prompt tells you whether Selective Call Forward is enabled or dis-
abled and then gives the menu choices.

Press

to enter the forwarding number (destination for forwarded calls).

Enter the forwarding number followed by the # key

Press # to save the entry (add it to your list), or press * to cancel the entry,

Select another menu item or hang up.

Identifying the Forwarding Destination Number

Press

*63

*83

NOTE:

On the 7960 MGCP phone, you may skip the next step.

Press the

Dial

soft key, or line or

SPEAKER

button, or pickup the handset.

A voice prompt tells you whether Selective Call Forward is enabled or dis-
abled and then gives the menu choices.

Press

to hear the forwarding number (destination for forwarded calls).

The voice prompt tells you the forwarding number and you are returned to
the Selective Call Forward menu.

Adding Forwarded Phone Numbers

Press

*63

*83

NOTE:

On the 7960 MGCP phone, you may skip the next step.

Press the

Dial

soft key, or line or

SPEAKER

button, or pickup the handset.

A voice prompt tells you whether Selective Call Forward is enabled or dis-
abled and then gives the menu choices.

Summary of Contents for Cisco 7940



























































































































































































Search results

Summary of Contents for Cisco 7940

Reviews:

Related manuals for Cisco 7940

Brands by name

Popular brands

Cisco Cisco 7940, User Manual

Search results

Summary of Contents for Cisco 7940

Reviews:

Related manuals for Cisco 7940

Brands by name

Popular brands