Cisco Cisco 7940 User Manual Download Page 43 | Manualshive

Page: 43 / 186

background image

Disabling Call Forward (All)

Cisco 7960/7940 Telephone User Guide

System Telephone Features

31

Disabling Call Forward

(All)

NOTE:

On the 7960 SIP, disabling Call Forward (All) can only be done using star codes.

Check with your system administrator for the star code to be used. If star codes
are not used, then the 7960 SIP is unable to support Call Forward (All).

…using the Phone

1.

On the 7960 SCCP, press the

Forward

soft key and hang up the line (press

the

EndCall

soft key or

SPEAKER

button).

2.

Call forward (all) is disabled and the phone hangs up.

…using Star Codes

1.

Press

73*

on the telephone keypad.

2.

Press the

Dial

soft key, or line or

SPEAKER

button, or pickup the handset.

3.

Call forwarding is disabled and the phone hangs up.

Call Forward (Busy)

Call Forward (Busy) allows you to forward calls arriving at your phone while it is
busy to be forwarded to the number you enter. Calls will not ring at your phone and
will be sent to the number entered as the forward destination.

Calls forwarded to an external number (7 or more digits) that are unanswered will
roll over to voice mail (if available) at that number. Calls forwarded to an internal
number (4- to 6-digit extension) that are unanswered will roll over to voice mail (if
available) for the called party (not the forwarding destination).

External forwarding must be supported by your system for external numbers to be
accepted. Be sure to include the access code for an outside line and the area code,
if necessary, with the external number. Up to 20 digits may be entered.

NOTE:

If an incoming call is marked “Urgent”, then the call will not be forwarded.

Enabling Call Forward (Busy)

NOTE:

The display will show the available options as the prompts are played. Depending
on available space on the display, the final entry (usually * for re-enter or exit) may
not appear completely.

«
...
41
42
43
44
45
...
»

Summary of Contents for Cisco 7940



























































































































































































Reviews:

No comments

Related manuals for Cisco 7940

Brand: Palm Pages: 2

Brand: Palm Pages: 60

Brand: Palm Pages: 130

Brand: Palm Pages: 6

Brand: Palm Pages: 28

Brand: palmOne Pages: 2

700wx - Treo Smartphone 60 MB

Brand: Palm Pages: 288

Brand: PalmMicro Pages: 19

Brand: Palm Pages: 16

Brand: United Security Products Pages: 24

Memoir SGH t929

Brand: Samsung Pages: 196

Brand: Samsung Pages: 23

Brand: Samsung Pages: 7

Brand: Samsung Pages: 2

Brand: chinavasion Pages: 44

Brand: T-Mobile Pages: 25

Brand: Archos Pages: 14

Brand: Centrality Pages: 59

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands