Cisco Cisco 7940 User Manual Download Page 146

Page: 146 / 186

Replying to a Message

134

Voice Mail Features (Option B Menu)

Cisco 7960/7940 Telephone User Guide

620-05600070B

Record your introductory message.

To forward the voice mail immediately without an introductory message,
press

immediately after the prompt.

Press

to accept the message.

Choose one of the following options to finish forwarding:

•

Press

to forward the message.

•

Press

to change the introductory message.

•

Press

to review the introductory message.

•

Press

to mark urgent and forward.

•

Press

to cancel the forward.

Press

at anytime to cancel the forward. If you press *, you must reenter the

extension(s) and any desired introduction.

Replying to a Message

To reply to a message you receive:

Press

to reply to the message.

You hear a prompt to record your reply.

Record your reply message.

Press

to accept your message.

Your voice mail system gives you the following options:

•

Press

to send reply.

•

Press

to change reply.

•

Press

to review reply.

•

Press

to mark urgent and reply.

•

Press

to cancel the reply and re-record.

You hear the message options again.

Dialing Back a Caller

To dial a caller who left a message (if Caller ID information is available):

Press

Sending a Message Directly to an Extension

You can send a voice mail message directly to an extension without dialing their
extension and having to wait for the call to roll to the voice mail system.

Summary of Contents for Cisco 7940



























































































































































































Search results

Summary of Contents for Cisco 7940

Reviews:

Related manuals for Cisco 7940

Brands by name

Popular brands

Cisco Cisco 7940, User Manual

Search results

Summary of Contents for Cisco 7940

Reviews:

Related manuals for Cisco 7940

Brands by name

Popular brands