Cisco Cisco 7940 User Manual Download Page 143

Page: 143 / 186

Marking a Message as Urgent

Cisco 7960/7940 Telephone User Guide

Voice Mail Features (Option B Menu)

131

620-05600070B

Press

to mark as urgent and send.

NOTE:

If your system administrator has turned on message notification, messages

marked as urgent will automatically notify of the recipient that they have an urgent
voice message.

Changing Your Password

The system default for your voice mail password is your extension number. To
keep others from listening to your voice mail messages, you should change your
password to something only you know.

Access the voice mail system.

Press

to access the Mailbox Options menu.

Press

to change your password.

Enter your new password by pressing numbers on the keypad followed by

Enter your new password again. A prompt will tell you if you have successfully

changed your password.

NOTE:

If you have messages in your voice mail box, but you want to skip them and

change your password, press

to get the main menu, then follow the above steps.

Otherwise listen to your messages and then follow the above steps.

Skipping the Mail Menu to Hear Messages

To immediately begin listening to voice mail, press

during the voice mail menu

announcement.

Returning to the Auto Attendant or Operator

When calling from outside of the VoIP system, you can escape from voice mail to
the auto attendant or operator using the star (

) key. Press

(as directed by

the prompts) to move from the selected option to the previous menu. When you
reach the main voice mail menu, press

to transfer to the main number or operator.

Summary of Contents for Cisco 7940



























































































































































































Search results

Summary of Contents for Cisco 7940

Reviews:

Related manuals for Cisco 7940

Brands by name

Popular brands

Cisco Cisco 7940, User Manual

Search results

Summary of Contents for Cisco 7940

Reviews:

Related manuals for Cisco 7940

Brands by name

Popular brands