Follow these steps to set the system clock:
SUMMARY STEPS
1.
enable
2.
Use one of the following:
•
clock set hh:mm:ss day month year
•
clock set hh:mm:ss month day year
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Step 1
Device>
enable
Manually set the system clock using one of these formats:
Use one of the following:
Step 2
•
clock set hh:mm:ss day month year
•
hh:mm:ss—
Specifies the time in hours (24-hour
format), minutes, and seconds. The time specified is
relative to the configured time zone.
•
clock set hh:mm:ss month day year
Example:
•
day—
Specifies the day by date in the month.
Device#
clock set 13:32:00 23 March 2013
•
month—
Specifies the month by name.
•
year—
Specifies the year (no abbreviation).
Configuring the Time Zone
Follow these steps to manually configure the time zone:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
clock timezone zone hours-offset
[
minutes-offset
]
4.
end
5.
show running-config
6.
copy running-config startup-config
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Step 1
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
11
Administering the Device
Configuring the Time Zone
