Options 1 and 2 provide an easy connection option, and options 3 and 4 provide a secure environment
connection option. Cisco Smart Software Manager On-Prem (formerly known as Cisco Smart Software
Manager satellite) provides support for options 3 and 4.
Configuring a Connection to CSSM and Setting Up the License
Level
The following sections provide information about how to set up a connection to CSSM and set up the license
level.
Setting Up a Connection to CSSM
The following steps show how to set up a Layer 3 connection to CSSM to verify network reachability. Skip
this section if you already have Layer 3 connectivity to CSSM.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
{
ip
|
ipv6
}
name-server server-address 1
[
server-address 2
] [
server-address 3
] [
server-address 4
]
[
server-address 5
] [
server-address 6
]
4.
ip name-server vrf Mgmt-vrf server-address 1
[
server-address 2
] [
server-address 3
] [
server-address
4
] [
server-address 5
] [
server-address 6
]
5.
ip domain lookup source-interface interface-type interface-number
6.
ip domain name example.com
7.
ip host tools.cisco.com ip-address
8.
interface vlan_id
9.
ntp server ip-address
[
version number
] [
key key-id
] [
prefer
]
10.
switchport access vlan vlan_id
11.
ip route ip-address ip-mask subnet mask
12.
license smart transport callhome
13.
ip http client source-interface interface-type interface-number
14.
exit
15.
copy running-config startup-config
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode.
enable
Step 1
Example:
Enter your password, if prompted.
Device>
enable
Enters global configuration mode.
configure terminal
Example:
Step 2
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
88
Configuring Smart Licensing
Configuring a Connection to CSSM and Setting Up the License Level
