Installing the Solar Shield
Figure 25: Solar Shield
M4 screws to install the solar shield on to the
antenna.
4
Mounting arm
1
Grounding point when solar shield is used
5
Solar Shield (C-ANT9104-CVR=)
2
M8 nut
3
If the installation location exposes the antenna to the sun, you may order and install the solar shield, an optional
accessory to protect the AP from the sun. Install the solar shield on the antenna using the four M4 screws
before mounting it to a wall or pole.
You may order the optional solar shield accessory using the PID C-ANT9104-CVR=.
Procedure
Step 1
Install grounding standoff included in the solar shield kit when the optional solar cover is used.
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna
23
Introduction to Cisco Catalyst 9130 Access Point with 9104 Stadium Antenna
Installing the Solar Shield
