62-47
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 62 Configuring Network Security with ACLs
Configuring Object Group ACLs
Creating an IPv6 Service Object Group
To create an IPv6 service object group , perform this task:
Step 4
Repeat the steps until you have specified all objects on
which you want to base your object group.
Example:
Switch(config-v6network-group)#
2002::1/64
—
Step 5
{
end
} | {
exit
}
Example:
Switch(config-network-group)#
end
To exit the configuration mode, enter the
end
command.
To exit the IPv6-address object-group configuration mode,
enter the
exit
command.
Command or Action
Purpose
Command or Action
Purpose
Step 1
configure terminal
Example:
Switch#
configure terminal
Enters global configuration mode.
Step 2
object-group v6-service
object-group-name
Example:
Switch(config)#
object-group v6-service mySG
Defines object group name and enters the service
object-group configuration mode.
Step 3
{
0-255
|
ahp
|
description
descripton-text
|
esp
|
exit
|
group-object
|
hbh
|
icmp
|
ipv6
|
no
|
pcp
| s
ctp
|
tcp
|
tcp-udp
|
udp
}
Example:
Switch(config-v6service-group)#
description
example of service object group
Switch(config-v6service-group)#
esp
(Optional) Configures a member of the group and specifies
a description of the object group.
For the object group, you can configure a network address
plus mask or a host (identified by host name or IPv6
address)
Step 4
Repeat the steps until you have specified all objects on
which you want to base your object group.
Example:
Switch(config-v6service-group)#
ahp
—
Step 5
{
end
} | {
exit
}
Example:
Switch(config-v6service-group)#
end
To exit the configuration mode, enter the
end
command.
To exit the IPv6-address object-group configuration mode,
enter the
exit
command.
Summary of Contents for Catalyst 4500 Series
Page 2: ......
Page 4: ......
Page 2086: ...Index IN 46 Software Configuration Guide Release IOS XE 3 9 0E and IOS 15 2 5 E ...
