1-29
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Chapter 1 Product Overview
Management Features
–
To span traffic belonging to specific VRFs on an EVN trunk, configure
filter vlan
on the SPAN
session with the corresponding VNET tags as vlan_ids and configure VLANs specified in
filter
vlan
.
–
To span traffic in specific VRFs on all interfaces, configure
vlan
as the SPAN source with
VNET tags as vlan_ids and configure VLANs specified as sources.
–
If cpu is configured as a SPAN source, then transmit packets that will be spanned are tagged by
default. If the
encapsulation dot1q
option is set on the SPAN session, then the cpu transmitted
packets, which are spanned, are double tagged.
Refer to
Chapter 66, “Configuring SPAN and RSPAN,”
for information on configuring SPAN
sessions.
Embedded CiscoView
A web-based tool to configure the Catalyst 4500 series switch. Embedded CiscoView is a device
management application that can be embedded on the switch flash and provides dynamic status,
monitoring, and configuration information for your switch.
For more information on Embedded CiscoView, see
Chapter 4, “Administering the Switch.”
Embedded Event Manager
Embedded Event Manager (EEM) is a distributed and customized approach to event detection and
recovery offered directly in a Cisco IOS device. EEM offers the ability to monitor events and take
informational, corrective, or any desired EEM action when the monitored events occur or when a
threshold is reached. An EEM policy is an entity that defines an event and the actions to be taken when
that event occurs.
For information on EEM, see the URL:
http://www.cisco.com/en/US/products/ps6815/products_ios_protocol_group_home.html
Ethernet Management Port
The Ethernet management port, also referred to as the
Fa1 or fastethernet1 port
, is a Layer 3 host port
to which you can connect a PC. You can use the Ethernet management port instead of the switch console
port for network management. When managing a switch stack, connect the PC to the Ethernet
management port on a Catalyst 4500 series switch.
For more information on Ethernet management port, see the “Using the Ethernet Management Port”
section in
Chapter 9, “Configuring Interfaces.”
File System Management (Supervisor Engine 7-E, 7L-E, and 8-E)
The format command for IOS XE 3.1.0SG changed slightly compared to the classic IOS format because
the later does not support ext2 format.
For USB flash under IOS XE 3.1.0SG, there are 3 optional formats, i.e. FAT16, FAT32 and EXT2:
Switch#
format usb0: ?
FAT16 FAT16 filesystem type
Summary of Contents for Catalyst 4500 Series
Page 2: ......
Page 4: ......
Page 2086: ...Index IN 46 Software Configuration Guide Release IOS XE 3 9 0E and IOS 15 2 5 E ...
