C-11
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
show platform ip unicast
show platform ip unicast
Use the
show platform ip unicast
privileged EXEC command to display platform-dependent IP unicast
routing information.
show platform ip unicast
{
adjacency
[
A.B.C.D
]|
cef-idb
|
counts
|
dhcp
|
failed
{
adjacency
|
arp
[
A.B.C.D
]
|
route
}
|
mpaths
|
proxy
|
route
[
A.B.C.D
] |
standby
|
statistics
|
trace
}
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
adjacency
[
A.B.C.D
]
Display the platform adjacency database. The keyword has this meaning:
•
A.B.C.D—
(Optional) Display adjacency information for the specified IP
address.
cef-idb
Display platform information corresponding to Cisco Express Forwarding
(CEF) interface descriptor block.
counts
Display the current counts for the Layer 3 unicast databases.
dhcp
Display the DHCP system dynamic addresses.
failed
{
adjacency
|
arp
[
A.B.C.D
]
|
route
}
Display the hardware resource failures. The keywords have these meanings:
•
adjacency
—Display the adjacency entries that failed to be programmed
in hardware.
•
arp
—Display the Address Resolution Protocol (ARP) deletions because
of failure and because of retries.
•
A.B.C.D—
(Optional) Prefix of the ARP entries to display.
•
route
—Display the route entries that failed to be programmed in
hardware.
mpaths
Display the Layer 3 unicast routing multipath adjacency database.
proxy
Display entries for the proxy Address Resolution Protocol (ARP) database.
route
[
A.B.C.D
]
Display the platform route database. The keyword has this meaning:
•
A.B.C.D—
(Optional) Display entries for the specified IP prefix.
standby
Display the platform standby information.
statistics
Display the Layer 3 unicast routing accumulated statistics.
trace
Display the platform event trace logs.
Release
Modification
12.1(14)AX
This command was introduced.
