2-507
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show ip sla twamp connection
show ip sla twamp connection
Use the
show ip sla twamp connection
command in user EXEC mode to display the current Cisco IOS
IP Service Level Agreements (SLAs) Two-Way Active Measurement Protocol (TWAMP) connections.
show ip sla twamp connection
{
detail
[
source-ip
ip-address
] |
requests
} ]
Syntax Description
Defaults
Displays output for all running IP SLAs TWAMP sessions.
Command Modes
User EXEC
Command History
Usage Guidelines
Use the
detail
keyword to display detailed information for a single IP SLAs TWAMP connection.
Use the
requests
keyword to display the current IP SLAs TWAMP connection requests.
Examples
The following is sample output from the
show ip sla twamp connection detail
command:
Switch>
show ip sla twamp connection detail
Connection Id: 91
Client IP Address: 172.27.111.225
Client Port: 43026
Mode: Unauthenticated
Connection State: Connected
Control State: None
Number of Test Requests - 0:1
detail
Display current connection details.
source-ip
ip-address
(Optional) Display connection details from a specific TWAMP connection.
requests
Display current connection requests.
Release
Modification
12.2(52)SE
This command was introduced.
