Purpose
Command or Action
Configures an IPv6 snooping policy with a name.
ipv6 snooping policy policy-name
Example:
Device(config)#
ipv6 snooping policy mypolicy
Step 3
Configures security level to inspect and drop any
unauthorized messages.
security-level guard
Example:
Device(config-ipv6-snooping)#
security-level
guard
Step 4
Configures the role of the device, which is a node, to
the attached port.
device-role node
Example:
Device(config-ipv6-snooping)#
device-role node
Step 5
Sets the protocol to glean addresses in DHCP or NDP
packets.
protocol
{
dhcp
|
ndp
}
Example:
Device(config-ipv6-snooping)#
protocol ndp
Step 6
Configuring Layer 2 Port as Multicast Router Port (CLI)
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ipv6 mld snooping vlan vlan-id mrouter interface Port-channel port-channel-interface-number
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode.
enable
Step 1
Example:
Device>
enable
•
Enter your password if prompted.
Enters global command mode.
configure terminal
Example:
Device#
configure terminal
Step 2
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
OL-29890-01
221
Configuring Wireless Multicast
Configuring Layer 2 Port as Multicast Router Port (CLI)
