Cisco Catalyst 3650 Series, Command Reference Manual

Page: 118 / 1108

show module
To display module information such as switch number, model number, serial number, hardware revision
number, software version, MAC address and so on, use this command in user EXEC or privileged EXEC
mode.
show module
[ switch-num ]
Syntax Description
(Optional) Number of the switch. switch-num
Command Default
None
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
Modification Release
This command was introduced. Cisco IOS XE Denali 16.1.1
Usage Guidelines
Entering the show module command without the switch-num argument is the same as entering the show
module all command.
Examples This example shows how to display information for all the modules on a Cisco Catalyst 3850 Series switch:
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
92
show module